|
View Full Version : 02 Legacy OEM Hood Deflector (aka Bug Guard) Peaty 01-26-2002, 08:23 PM Install was pretty easy. The rubber bumpers come already attached to the guard. It's nice that they supply a whole extra set of bumpers and some anti-rub strips too. I got mine here: http://www.wrxrsparts.com/ Peaty 01-26-2002, 08:24 PM page2 Peaty 01-26-2002, 08:27 PM page3 Peaty 01-26-2002, 08:28 PM parts Peaty 01-26-2002, 08:29 PM guard Peaty 01-26-2002, 08:30 PM Before Peaty 01-26-2002, 08:32 PM After Peaty 01-26-2002, 08:33 PM Close up shot: Peaty 02-01-2002, 05:24 AM Quick note, The 2000 model Outback deflector (Australian spec). has 5 screws in total hold it on - one each side above the headlights and 3 in the middle. As apposed to the US version with only 2 screws. There are TWO different size screws for it. The "outside" ones on my car are smaller than the middle three. If you pull it off to clean under it then mix up the screws you end up scratching your head wondering why you can't get it back on again. Thanks goes to Peter McConaghy for the input. Peaty 07-23-2002, 08:05 PM Here is what one looks like on a Black Outback Peaty 07-23-2002, 08:06 PM front |