I did this for my RS as soon as the WRX came out and I got the part numbers. Pretty sure I was the first one on the block to try this back in 01' Anyway, while this kind of falls in the Bling catagory I think it's a nice looking set of pedals and does spruce up the interior w/o going overboard.

I got the pedals from Jamie (Subie Gal) Here:

http://www.allsubaru.com/

and the matching Dead Pedal from Kastle (Kastle's Korner) Here:

http://www.kastleskorner.com/

This will work for all Foresters but the nice thing about the F-XT is it's drive by wire and you don't have to deal with the throttle cable. Only a plug to undo.

I've already done a write-up on these and it's works for the Forester too. Have a look here:

http://www.scoobymods.com/forums/showthread.php?t=128

The only difference will be if you have a Forester XT or some other Subaru with drive by wire. As stated then you only have to undo a plug and not deal with the throttle cable like the above link shows.

Here are some pics that will show how the F-XT needs to be done. For everything else the above link will do.

Some newer shots of the pedals

Again I have an install for this too:

http://www.scoobymods.com/forums/showthread.php?t=1269

Depending on your year you have a few install options. What I decided to do was install the pedal over my existing dead pedal. I used double sided tape on the plastic after I cleaned it with the supplied cleaning pad. You can remove the existing dead pedal by pulling it off and re using the push in fasteners to hold the pedal in place. I just like the way it looks when it's on with the tape, that's just me though.