WRXNFXKC

so I swapped the fogs in. There is a little bracket, and you move that and the lights, then plug them in, then add the switch and plug in the harness..

Here is the issue, they will not light up.

The switch lights up when in and headlights on like it is supposed to, but the lights will not eliminate..

Do I need to add a relay??

What is wrong?

 

JayTee

If it's the same as an '04 TS, you will need a relay in relay position #4 (Part 82501FC100 or an updated version thereof).

Hope this helps?

WRXNFXKC

That confirms it thanks, Should just swap over from the WRX right?

I will probably do the fog light fix while i am in there.. 8)

JayTee

Yes - see attached schematic. Relay is needed in relay position #4.

Sorry - I have no experience re the fog light fix. I am still "stock" in this area.

Good luck.

Attached Files

Front Fog Light System.pdf (355.1 KB, 44 views)

WRXNFXKC

Relay FTMFW!!

I inserted it though the coin tray door too so easy peasy.

Only fly in the ointment, the drivers side plug doesn't click on. I will need to tape it next time I am in there.

Fog light fix give the switch power from the parking lights so you can run parking lights, and fogs without head lights.. 8) I will probably do that tomorrow, probably.